Products

The aim of the system is to warn the drivers by attracting the attention to increase the driving safety and comfort in variety of weather conditions (foggy, rainy, snowy) and at high speed driving.
One of the most important features that distinguishes the "GPS Based Synchronous Flasher" from its counterparts is that it does not lose the synchronization without the need for a master device due to being GPS based. The non-GPS-based flasher products have a master device and It must be equipped with additional mode to enable synchronization. The disadvantage of such devices is that all devices lose synchronization if the master device is interrupted the communication with other devices or goes into a fault condition due to any reason. Since GPS-based Solar Flasher products do not have master-slave modes, it is a great advantage that they continue to operate without interrupting the synchronization of other devices in the event of a communication break or failure. Another advantage of our product is that there is no need for a pre-conditions  for any distance between the devices as they do not need a communication between them.

 
 

Product Code	Q300GPSF
Product Code	Signalization Products
TECHNICAL SPECIFICATION
Diameter	300mm
Housing/ Mask Material Type	Polycarbonate UV.
Housing Color	Black-Gray-Orange
Impact Resistance	IR3
Vibration	Class AJ3
Ingress Protection	IP55
Operating Temperature	-30°C to +70°C
Operating Voltage	12VDC
LED	Red, Yellow and Greenl 5mm/10mm LEDs
Lumenious Intensity	>250cd
Solar Panel	20W
Battery	12V-7Ah or 20Ah
Operating Modes	It can work in 8 different scenarios. (It can be controlled by the button on it.)
Nigh Mode	Available
Protection Mode	Over chage & discharge protection
Charging Type	MPPT (optional)
Working Without Solar Power	With a fully charged 20Ah battery at least 20 days in 24-hour mode
Battery Protection Feature	When the battery voltage drops below 11.5V, it closes the output and prevents it from drying out.
Dimming feature	Light brightness can be controlled (Compatible with battery voltage)
Smart Mode	The output level of the battery is given at 9 different brightness levels.
Certificate	TS EN 12352